Bachmann Dynamis Bedienungsanleitung PDF herunterladen

8 www.bachmann-collectorsclub.co.uk

Wireless DCC with Dynamis

An introduction to the use and benefits of the

Bachmann Dynamis wireless system by

Nigel Burkin

INTRODUCING DYNAMIS

ot having the inconvenience of

cables connecting handsets to

panels in the layout fascia opens up

the enjoyment of layout operation. You can

stand exactly where operations are taking

place. The Dynamis DCC system package

(36-505) is an entry level set that will allow

you to enjoy that freedom. It is a fully-

fledged DCC system capable offering 4-digit

addressing, control of up to 100 accessories

(25 accessory decoders of 4 outputs for

each), control of 20 mobile decoder

functions and a 2.5 amp power rating which

should be sufficient for six modern

standard locomotives equipped with 5-pole

skew wound motors to be operated at the

same time. Dynamis has been used on my

own portable N gauge layout and the fleet

of 20 or so locomotives and multiple units

in contact with the track, with three in

operation at one time does not exceed the

current rating of 2.5 amps.

The entry level set comes complete with an

advanced handheld wireless handset (called

a throttle or cab because it represents the

driving controls of a locomotive), a safety

lanyard (so to avoid dropping the throttle)

together with the base station/receiver

assembly, a wall plug transformer and an

instruction booklet.

The entry level set is an important part of

the Dynamis system because it is the heart

of Dynamis. The base station (labelled on

the casing as the ‘Command Station’)

contains the command station and booster

that are the key components of any DCC

system. In making the entry level set the

core component of the system, it only takes

a hardware upgrade, the Pro Box, to

dramatically expand Dynamis with many

additional features and benefits. At the same

time, the Dynamis Command Station box

does not become an ancillary controller of

limited value after the Pro Box has been

purchased, which is sometimes the case

with other DCC systems. Nothing is

thrown away or made redundant when

upgrading with a Pro Box.

The low cost of the entry point Dynamis

set makes it the perfect way to make a start

with wireless DCC and with its supplied

transformer together with advanced DCC

features included in the set at the start, the

system beats many other entry level

packages. Plus, there’s the added interest of

wireless control using infrared technology

together with a core system based on ESU

ECoS DCC technology which is tried,

proven and highly regarded. Dynamis (and

the Pro Box) has an NMRA conformance

seal, the symbol for which is displayed on

the box. NMRA conformance is highly

valued in the DCC community and

indicates that a good level of DCC

compatibility from the command station, to

track and decoders has been achieved.

SO WHAT DOES WIRELESS

MEAN AND HOW DOES

DYNAMIS MAKE THE

OPERATING EXPERIENCE

DIFFERENT?

Wireless = no cables and flexible operation…

Removing a throttle cable from the

equation introduces some different factors

for layout operations. Roaming operation

becomes the norm. This means that you can

following a train around the layout, obeying

signals and enjoying the experience of train

driving right to the point where the action

is taking place. Another benefit is being

Wireless technology enhances layout operations by not

tethering controls to connection panels in the layout fascia.

You can move to any point on the layout where operations,

such as shunting, take place.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Wireless DCC with Dynamis

8 www.bachmann-collectorsclub.co.ukWireless DCC with DynamisAn introduction to the use and benefits of the Bachmann Dynamis wireless system by Nigel B

Seite 2 - LEVEL SET:

www.bachmann-collectorsclub.co.uk 9able to observe operations on parts of thelayout otherwise inaccessible unless atethered throttle was put downm

Seite 3 - BOX EXTENSION PACK

10 www.bachmann-collectorsclub.co.uk4: The same handset (throttle) supplied withthe entry level set is used when the systemis upgraded with Pro Box. F

Seite 4 - PUTTING DYNAMIS TO

www.bachmann-collectorsclub.co.uk 119: The rear of the Pro Box with trackpower bus port and ECoS link port.10: A view of the underside of thecomma

Seite 5 - (THROTTLES) IN PICTURES:

12 www.bachmann-collectorsclub.co.uk17: It is good practice to label your wiring!18: The additional IR Receiver is locatedfor maximum coverage. It is

Seite 6

www.bachmann-collectorsclub.co.uk 1327: Speed step changes are made throughthe menu – select the edit speed screen.Changes are specific to the sel

Kommentare zu diesen Handbüchern

Keine Kommentare

Bachmann Dynamis Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Bachmann Dynamis herunter. Wireless DCC with Dynamis Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern